Supero SUPER P6SLA, User'S And Bios Manual

Page: 70 / 91

Chapter 5: Running Setup
5-15
Device 3 (Secondary Slave IDE)
These options are for event monitoring. The settings for each of
these options are Monitor or Ignore.
LAN Wake-Up
RTC Wake-UP
Hour
Minute
Options for LAN Wake-Up and RTC Wake-Up are Disabled and
Enabled. Note: The optimal setting for Hour and Minute is N/A.
There is no fail-safe setting for Hour and Minute.
5-1-5 PCI/PnP Setup
Plug and Play-Aware OS
The settings for this option are Yes or No. Set this option to Yes
if the operating system in the computer is aware of and follows
the Plug and Play specification. AMIBIOS only detects and en-
ables PnP ISA adapter cards that are required for system boot.
Currently, only Windows 95 is PnP-Aware. Set this option to No if
the operating system (such as DOS, OS/2, W indows 3.x) does not
use PnP. You must set this option correctly. Otherwise, PnP-
aware adapter cards installed in the computer will not be config-
ured properly.
PCI Latency Timer (PCI Clocks)
This option specifies the latency timings in PCI clocks for all PCI
devices. The settings are 32, 64, 96, 128, 160, 192, 224, or 248.
PCI VGA Palette Snoop
The settings for this option are Disabled or Enabled. When set to
Enabled, multiple VGA devices operating on different buses can
handle data from the CPU on each set of palette registers on
every video device. Bit 5 of the command register in the PCI
device configuration space is the VGA Palette Snoop bit (0 is
disabled). For example: if there are two VGA devices in the
computer (one PCI and one ISA) and this option is disabled, data
read and written by the CPU is only directed to the PCI VGA
device's palette registers. If enabled, data read and written by the
CPU is directed to both the PCI VGA device's palette registers and
the ISA VGA palette registers. This will permit the palette regis-