Sulzer Metco ECO ARC 600, Manual

Page: 44 / 94

ECO ARC 600
4-2
Revision 1/10/08
4.2 Installation schema
4.3 Connecting hose package to power supply
• Lay straight hose package without loops and bends.
• Connect atomizer air hose (3.1) to coupling (1.1).
• Connect current-air hoses (3.2) to current-air bolts (1.2).
• Connect control cable (3.3) to connector (1.3).
• Loose knurled screws at push drive.
Insert wire guide tubes (3.4) into bore (2.2) and lock with knurled screws.
4.4 Connecting power supply to plant mains
• Connect adequate compressed air hose to coupling (1.4) and to plant compressed air supply.
Make sure, that no impurities are inside the hose.
• Connect mains cable (1.5) to plant AC mains supply.
Make sure that the correct voltage is available.
1
1.1, 3.1
1.5
1.2, 3.2
1.3, 3.3
2.2, 3.4
2.1
3
2
1.4