![Sulzer Metco ECO ARC 600 Manual Download Page 72](http://html1.mh-extra.com/html/sulzer-metco/eco-arc-600/eco-arc-600_manual_1390515072.webp)
ECO ARC 600
7-4
Revision 1/10/08
7.2
Hose package LD/U3
(M)
Perform a visual external check for damage
(M)
Wire guide tubes:
Check wire for smooth running through the tubes. Therefore
loose wire guide tubes. Replace wire guide tubes if you meet
with resistance when pushing the wire. Treat new wire guide
tubes inside with graphite powder. You find a fill bottle in the
toolkit.
(W)
Power cable, visual external check for damage. Check stick
and screw connections to firm sit.
(M)
Check stick connections of control cable - motor cable - and
solenoid valve cable (if existing).
Check stick connections. Pay attention that numbers are corre-
sponding. Check plugs. Check transition. (see circuit diagram)
7.3
Power supply with Push 4 drive
(M)
Check wire feed and pressure rolls of the push gear for wear.
The wire is fed via highly wear-resistant plastic rolls. The conti-
nuous wire slip is intentional.
(W)
Check that pressure rolls are running smoothly, if necessary
remove and grease them. (Sliding fit)
(W, M) Blow out the power supply at the end of each shift.
Caution!
Only blow out in front of the dust extraction and with extraction
running!
The frequency will have to be matched to where the machine is loca-
ted and the amount of dust, if necessary once per week.
7.4
Oiler (back side power supply)
(D)
Check oil level and top up as necessary.
Check oil delivery = 1 drop every 6 seconds when the manual
spray device is running.
Summary of Contents for ECO ARC 600
