Sulzer Metco ECO ARC 600, Manual

Page: 66 / 94

ECO ARC 600
6-10
Revision 1/10/08
Indication Cause Remedy
Push-gear
Power supply
No tension at pressure rolls Check wire pressure lever
Wire feed rolls and pressure
rolls must be pressed
together.
Pressure rolls not smooth
running
Soiled or worn out Clean and grease pressure
rolls; if necessary change
(s. maintenance)
Wire feed rolls soiled or worn
out Clean or change wire feed
rolls
AC-Motor does not run At push-gear:
Check fuse and motor cable
At power supply:
Check fuses (s. circuit-dia-
gram).
Spray device Wire feed rolls soiled or worn
out Clean or change wire feed
rolls
Hose package Wire guide tube worn out or
bended Let check from SMOSU or
authorized specialist staff.
Spray device Contact nozzles badly ali-
gned, blocked or worn out.
Spray wire scorched. Check contact nozzles:
Clean or change. Align
nozzles.
(s. maintenance)
ON OFF ON
System OFF
Error Underload