Sulzer Metco ECO ARC 600, Manual

Page: 73 / 94

ECO ARC 600
7-5
Revision 1/10/08
7.5 Filter (back side power supply)
(D) Dewater daily. More often if the amount of water dictates
so.Check filter insert and change as necessary. (If the filter is
blocked the entire machine may fail to operate. It will be shut off
automatically by the pressure monitoring.)
7.6 Drum decoiling device
(D) For metal drums in particular, the spray dust must be con-
tinuously removed as there is a danger from leakage cur-
rent.
Position the two drum decoiling devices at a distance as there
is a danger of short-circuit.
(M) Check that reversing wheels run freely and grease as neces-
sary.
7.7 Spool decoiling device
(M) The adapters must run freely, grease as necessary.
(W) Check brake.
Tighten nut (spring) only until the hasp-spool no longer runs on.
7.8 Table of lubricants
Component Interval for greasing Grease
Worm gear
(Spray device LD/U3)
1000 operating hours
M0S2 Installation grease
Acheson „Molydag 49“
Air motor
(Oiler at power supply)
Oiler setting
each 6 seconds 1 drop
Sulzer Metco OSU air motor oil
alternatively
Esso „Pneumatic oil 32, 100“