Sulzer Metco ECO ARC 600, Manual

Page: 57 / 94

ECO ARC 600
6-1
Revision 1/10/08
6 Troubleshooting
This wire arc spray system is equiped with a
PLC. The PLC is located behind the right panel
of the power supply. The PLC has a small dis-
play for status information and error messages.
• Attention!
Electrical energy may be fatal by bodily contact!
• Electrical appliances and tools may be set up, repaired or checked only in the charge of or by
specialist staff!
• Electrical appliances and machines may only be used if they satisfy internal company and local
security request as well as possible influences of the surrounding!
• Electrical appliances and machines must be checked for their proper condition before putting
into operation for the first time, after their maintenance or passing a definite period of inspection.
• It is forbidden to work at energized parts of an electrical appliance!
You may work at energized parts of electrical appliances and machines if you pay attention to
the five security rules:
1. Turn off power
2. Protect again reactivation
3. Check if system is de-energized
4. Eearth and short-circuit
5. Cover neighboring energized parts
• Special caution in damp rooms!
• Do not clean the power supply with water!
• Do not expose the power supply to the rain!
• Sweaty or damp clothing and shoes are dangerous, they are conductive.
Anlage
Aus