Sulzer Metco ECO ARC 600, Manual

Page: 10 / 94

General Safety Instructions
1-4
Revision 1/10/08
1.3 Authorized use
This system is intended for the sole use of thermal coating of
workpieces in atmosphere. The system may be used solely in its
configuration as delivered, using the components as supplied.
Any other use of the system or its components is considered illegal.
Authorized use also includes the reading of the manuals and
compliance with all regulations.
1.4 Unauthorized use
The system has been manufactured in accordance with the current
level of technology and accepted safety regulations. However,
unauthorized use may result in bodily harm or death of the operator or
third parties, or in harm to the product itself or other material assets.
Under no circumstances should the system be used for the following
unauthorized purposes:
This listing is not comprehensive.
System and components Unauthorized use
System - Use without previous instruction
- Use beyond the operational limits
- Use in an atmosphere at risk for explosions
- Disabling safety devices, e.g. emergency shut-down
devices
- Use as control for other processes, e.g. for arc welding
- Use for incineration of articles or waste
- Installation of third-party components without coordination
with Sulzer Metco
- Installation of alternative or additional equipment for
displaying, measuring, controlling or setting of coating
parameters
Control electronics - Use of wrong operation modes
- Reconfiguration of control program
- Installation of additional or alternative displaying and
measuring devices without coordination with Sulzer Metco
Spray device - Use of atomizer gas for cooling or cleaning any objects
Spare parts - Installation of spare parts other than those from Sulzer
Metco