Sulzer Metco ECO ARC 600, Manual

Page: 56 / 94

ECO ARC 600
5-10
Revision 1/10/08
5.5 Further instructions
• Before starting work each day check that all safety measures and
precautions for thermal spraying have been taken.
• Check personal protective equipment each day before starting
work.
• Check the production parameters.
• For coating larger, joined surfaces it is an advantage to exchange
the standard round stream system for a flat spray system.
• Please seek our advice.
• Perform functional monitoring of the machine each day.
• The hose and cable set should not be kinked. Lay out in large
loops only.
• Ensure spray wire is clean and dust-free.
• Check the quality of the compressed air.
• Empty the condenser daily.
• Check the oil level and delivery of the oiler weekly.
Top up only with suitable oil.
• If the compressed air contains large amounts of oil and water, this
condensate will also reach the oiler and adversely affect the air
motor oil. The oil must then be changed.