Sulzer Metco ECO ARC 600, Manual

Page: 35 / 94

ECO ARC 600
2-1
Revision 1/10/08
2 System-dependent Informations
2.1 What you need to know about this wire arc
spray unit
2.1.1 General Informations
This arc spray unit constists of the following components:
• 1x Power supply ECO ARC 600
• 1x Spray device LD/U3 (with hose pakage)
• 1x Wire feed drive Push 4
The Sulzer Metco OSU - wire arc spray unit is designed for coating
work pieces of all kind with metal layer
Sulzer Metco OSU GmbH has incorporated safety devices into the
ECO ARC 600, such as automatic shut-off if the compressed air fails
and if the minimal capacity is exceeded, temperature control of the
transformer, rectifier and AC motor, and electrical protective circuits to
guard against uncontrolled reactivation following faults.
Nevertheless: for your own safety always observe the safety regulati-
ons and technical rules and standards.
Repairs should only be performed by Sulzer Metco OSU - customer
service or Sulzer Metco OSU authorized personnel. Sulzer Metco
OSU original parts and accessories have been developed especially
for Sulzer Metco OSU systems. Spares or accessories that have not
been supplied by Sulzer Metco OSU have been neither tested nor
approved by Sulzer Metco OSU. Use of such parts may adversely
affect the features and safety of your system. Sulzer Metco accepts no
liability for damage resulting from the use of non-original spare parts.
The warranty conditions of Sulzer Metco OSU GmbH apply.