Stryker Altrix 8001, Operation Manual

Page: 26 / 1068

E En ng glliis sh h
E EN N
1-18 8001-009-005 REV D www.stryker.com
Introduction
Product alarms (Continued)
Icon, yellow Name Alarm priority
and delay Message Therapy
interrupted Check
Check patient
probe (A or B) Medium Abnormal change
in patient
temperature Yes Check probe
condition,
location, and
connections
Probe or adapter
malfunction (A or
B) Medium, 30
second delay No temperature
signal detected. Yes Check probe or
adapter cable
condition,
location, and
connections
Adapter cable
disconnected (A
or B) Medium, 30
second delay Adapter cable not
detected Yes Reinsert the
adapter cable. If
damaged,
replace the
adapter cable
Patient
temperature
deviation Medium Patient
temperature is ±
0.5° C (0.9° F)
outside of target
temperature
(Only will appear
after the initial
target is reached.)
No Check patient
condition,
placement of
thermal transfer
devices, and all
connections
Normothermia
deviation Low Patient
temperature is
outside of 36.0° C
(96.8° F) to 38.0°
C (100.4° F)
No
Check patient
condition,
placement of
thermal transfer
devices, and all
connections
Therapy pause Medium Therapy is
currently paused Yes To resume, press
and hold the play
/ pause for 2
seconds
Battery low Low Battery is low No Maintenance is
recommended. If
battery is not
replaced, the
product may not
function on the
next startup.
Patient
temperature
output (A or B) Low Patient
temperature
output is
inaccurate on the
external device,
or outside
supported range No Check output
adapter cable
connection. Tap
Confirm to
reactivate the
output port.