Stratasys Eden350V, User Manual

Page: 71 / 182

DOC-03050 Rev. A
5–35
Eden350V User Guide
4. Select
Polygon Reduction (Percent)
.
5. Enter the percentage of total polygons to display.
When you click
Apply
, the display changes.
Note: The setting affects the static display (when the object is not being
moved).
6. Set display options when the object is being moved ( Display while
changing view ):
•
Bounding Box— A box representing the object’s maximum
dimensions is displayed.
•
Adaptive Polygon Reduction— Varying degrees of polygon reduction
are applied, as necessary.
•
Entire Object— No polygon reduction is applied.
7. To save these settings, so that they will be applied every time you place
this object on the build tray, click
Save Polygon Reduction Data
.
8. Click
Apply
to see the results of the settings without closing the dialog
box.
Object display
options
The display format affects how quickly objects display. For example, if you
select
Bounding Box
, objects display faster than they do when you select
Entire Object . You can choose display formats for objects when they are
stationary ( static view ) and for when you are dragging them ( changing view ).
To select the object display preference while changing view, and in static
view:
1. Select to display objects:
•
With a Bounding Box (see figure 5 ‐ 36 on page 29)
•
With Adaptive Polygon Reduction ( changing view only)
•
With Polygon Reduction ( static view only)
•
Entire Object
2. Click
OK
when done.
Selecting the Entire Object option cancels polygon reduction.