Stratasys Eden350V, User Manual

Page: 155 / 182

DOC-03050 Rev. A
6–49
Eden350V User Guide
To test and calibrate UV lamp radiation:
1. Start the UV Calibration Wizard from the Options menu (see figure 6 ‐ 27
on page 6 ‐ 24).
2. In the following screen, select
Calibrate UV Intensity
to adjust the lamp’s
radiation level to the acceptable range.
Figure 6-74: UV Test/Calibration selection
3. In the following screen, select the UV sensor and measuring device to
be used.
Figure 6-75: UV device selection
UV Measuring Device
When you use the Stratasys UV sensor (TOL-03005-S), you connect it to the
printer. The wizard automatically measures and calibrates the UV radiation.
If you use a stand-alone UV radiation meter, you need to manually enter the
readings from the meter in the wizard screens.