Stratasys Eden350V, User Manual

Page: 175 / 182

DOC-03050 Rev. A
6–69
Eden350V User Guide
8. Position the waste container under the printer, on the load cells.
•
The container should be on the extreme right side of the
compartment.
•
Make sure that the waste drain tube is not crimped and that it is not
pinched by the container.
9. Close the waste compartment door.
Cleaning the
Exterior Panels
The painted exterior plastic panels of Eden 3D printers have a durable
finish, offering excellent chemical resistance to common cleaning materials.
Follow the recommendations below when cleaning these areas of the
printer.
Acceptable Cleaning Agents
•
mild soap solution
•
common household cleaners and window cleaners
•
common commercial and industrial detergents, 5% solution in water
•
alcohol (ethanol, isopropanol), 10% to 40% solution in water
Wipe the exterior of the printer, using a soft cloth moistened with the
cleaning solution.
Unacceptable Materials
•
industrial solvents
•
cleaning agents containing hydrocarbons, ketones, esters and lacquer
thinners
•
spray disinfectants
•
abrasives and agents which could wear away the panel finish
Dispose of the full waste container in accordance with environmental and
safety requirements.