Stopping automatically at the end of
the racking or in a crosswise road-
way
CAUTION
Risk of collision at the end of the racking or when en-
tering the crosswise roadway
If an object, e.g. another truck, is stationary in an un-
favourable position at the end of a rack or in a cross-
wise roadway, the truck may not detect the end of
the rack under certain circumstances. Crossing
trucks could then collide with the truck that is operat-
ing in
Assistance
mode.
–
The operator must be particularly alert at the end
of a rack. When the truck is in
Assistance
mode, the operator must ensure that the truck
does not drive beyond the end of the rack. The
operator is responsible for stopping the truck safe-
ly.
The truck is equipped with automatic end-of-
rack detection. If the racking on the side to
which the truck is aligned ends or if the rack-
ing is interrupted by a crosswise roadway, the
truck will stop automatically.
Stopping at the end of the racking
The truck detects that the rack contour does
not continue and the truck stops automatically
at the end of the aisle. The LED display of the
movement tracking sensors (1) changes to
"
Assistance
mode PAUSED".
–
To continue in
Assistance
mode, drive
the truck to a detectable rack contour in
Manual
mode.
AUTO-STOP
Operating the iGo neo
4
Operating the truck in "Assistance" mode
81
50108046112 EN - 07/2020 (03)
Summary of Contents for OPX 20
