Still OPX 20 Supplement To The Standard Operating Instructions Download

Page: 11 / 140

and people in the vicinity are completely pro-

tected.
The iGo neo autonomously detects the entire

warehouse layout using its laser environment

recognition system. As well as racks and ob-

stacles, the system identifies its operator and

all other people in the area.
The safety laser scanner on the front guaran-

tees driving safety through early identification

and intelligent assessment of obstacles. The

truck's own robotic computer converts the

scanner data to a steady driving style that can

be adjusted at any time. Damage to the load

during full braking is effectively avoided.

Less is more

The iGo neo also breaks new ground when it

comes to communicating with the operator.

The innovative concept of the iGo eliminates

the need for complex, cluttered operating sta-

tus displays. Simple light codes and symbols

convey everything that the operator needs to

know during operation. The light codes are

displayed via an innovative LED signal strip.

The non-verbal interface to the operator

means that the iGo neo overcomes linguistic,

cultural and age-related limitations.

First in intralogistics

The STILL iGo neo creates an intuitive part-

nership between the truck and its operator,

paving the way for a safe and efficient future

in intralogistics.

Foreword

Your iGo neo

50108046112 EN - 07/2020 (03)

Summary of Contents for OPX 20













































































































































Search results

Summary of Contents for OPX 20

Reviews:

Related manuals for OPX 20

Brands by name

Popular brands

Still OPX 20, Supplement To The Standard Operating Instructions

Search results

Summary of Contents for OPX 20

Reviews:

Related manuals for OPX 20

Brands by name

Popular brands