Still OPX 20, Supplement To The Standard Operating Instructions

Page: 30 / 140

When the truck is switched on, the remote
control must be kept in a safe place to prevent
unintentional operation. The remote control
can be operated unintentionally, e.g. if it is
carried in a trouser pocket / jacket pocket, or if
objects are placed on top of the remote con-
trol. While operating the truck, the remote con-
trol must always be kept in the supplied hold-
er.
Once work has been completed, the operator
must ensure that the remote control cannot be
accessed by unauthorised persons.
Additional requirements applicable
to the authorised service centre
Any work on components used for
Assis-
tance
mode must only be performed by the
service centre authorised by the manufacturer.
The service engineer must have received spe-
cial training from the manufacturer regarding
the handling processes, technology and repair
work involved with the iGo neo. It is not per-
mitted for other persons to perform work on
the components used for
Assistance
mode. This instruction does not apply to
cleaning procedures on components that are
not located inside the truck; refer to the chap-
ter entitled "Cleaning".
The following components are used for
As-
sistance
mode:
●
Safety laser scanners
●
Movement tracking sensors
●
Control components
●
Control electronics and control software
●
Emergency off switch
●
LED signalling unit
●
Switches
●
Remote control (including reception compo-
nents)
●
Collision camera (variant)
●
Foot protection sensors (variant)
Safety
2
Definition of terms used for responsible persons
22 50108046112 EN - 07/2020 (03)