Still OPX 20 Supplement To The Standard Operating Instructions Download Page 10

Page: 10 / 140

Your iGo neo

Intelligent order picking - your iGo neo

The iGo neo works with its operator as an au-

tonomous team-mate. It accompanies the op-

erator at every stage of the order-picking

process and is always within reach. It intuitive-

ly adapts to the working rhythm of its human

companion.
This autonomous team function is made pos-

sible by the motion tracking system developed

by STILL. Two high-performance sensors with

a 360° circumferential view monitor the entire

surrounding area. The intelligent software

tracks all of the operator's movements, mak-

ing the iGo neo the first order picker with cog-

nitive skills.

Measurable increase in efficiency

The iGo neo is based on the concept of "Auto-

mation on Demand". The operator can opt to

operate the truck manually or autonomously at

any time, depending on the situation. Unlike

conventional automation solutions, no com-

plex setup is required for operation.
Once it is moved to the start position at the

starting point, the highly adaptive iGo neo is

ready for operation right away. The truck uses

sensors to navigate at a selected distance

from the racks. It intelligently adapts to the

traffic situation, taking the local conditions into

account and slotting seamlessly into the cur-

rent material flow. The iGo neo observes junc-

tions, obstacles and the traffic rules with re-

spect to other trucks. This means that autono-

mous and conventional trucks can drive in

convoy safely for the first time.
The operator can move freely around the truck

during loading and unloading. It is irrelevant

whether the operator is picking orders on the

right, on the left or on both sides. Time that

would normally be spent climbing in and out is

saved. Walking along unnecessary routes is a

thing of the past. The fast, faultless picking

system moves straight to the central position.
The result is a measurable increase in

process safety and efficiency.

Safety first

The iGo neo uses intelligent navigation and

reliable safety monitoring to maintain a safe

distance from obstacles. The surrounding area

Foreword

Your iGo neo

50108046112 EN - 07/2020 (03)

Summary of Contents for OPX 20













































































































































Search results

Summary of Contents for OPX 20

Reviews:

Related manuals for OPX 20

Brands by name

Popular brands

Still OPX 20, Supplement To The Standard Operating Instructions

Search results

Summary of Contents for OPX 20

Reviews:

Related manuals for OPX 20

Brands by name

Popular brands