Required safety distances in the
aisle
Before using the iGo neo, the operating com-
pany must ensure that nobody could be put at
risk as a result of operating the truck in
As-
sistance
mode. The aisle widths must al-
low for the required safety distance between
the truck and the racks or any obstacles on
the roadway.
The shaded area shows the minimum safety
distances (X
1
, Y
1
, Z
1
) that the iGo neo must
maintain. The authorised service centre can
set increased safety distances (X
2
, Y
2
, Z
2
) ac-
cording to the requirements for use.
The iGo neo maintains the following safety
distances from objects in the aisle during op-
eration in
Assistance
mode:
Safety distances (example: "truck alignment RIGHT")
Distance from the rack contour
and obstacles on the right
X
1
50 cm (minimum distance)
X
2
Adjustable
Distance from obstacles (front)
Y
1
100 cm (minimum distance)
Y
2
Adjustable
Distance from the rack contour
and obstacles on the left
Z
5 cm * (minimum distance)
The truck always maintains a distance (X
1
) of
at least 50 cm from the rack contour on the
side of the roadway to which the truck is
aligned. This corridor is intended to ensure the
safety of persons in the working environment.
For safety reasons, it is recommended that a
minimum distance of 50 cm is set for both
sides of the truck (X
1
, Z
1
).
If a lateral distance (Z) of less than 50 cm is
set on the opposite side of the roadway to
which the truck is aligned, suitable protective
measures may be required.
X
1
Z
X
2
Y
1
Y
2
Example: Truck alignment RIGHT
Foreword
1
Using the iGo neo
10
50108046112 EN - 07/2020 (03)
Summary of Contents for OPX 20
