Still OPX 20, Supplement To The Standard Operating Instructions

Page: 58 / 140

Operating the buttons on the remote control
Button
1
-
Assistance
mode ACTIVE / PAUSED (iGo neo button)
Operation
Assistance
mode
Push 1 x briefly
When the truck is stationary:
PAUSED ACTIVE
When the truck is in motion:
ACTIVE PAUSED
1 x long press (min. ½ sec.)
When the truck is stationary:
ACTIVE PAUSED
Button
1
- Driving automatically without movement tracking (iGo neo button)
Operation Information
Press and hold the button
(min. 2 sec.).
The truck moves independently along the rack contour until
the button is released.
Can only be executed during "
Assistance
mode
PAUSED"
Button
2
- Lower the fork carriage
Operation Information
Hold the button down. Release the button to stop the lowering procedure.
Button
3
- Lift the fork carriage
Operation Information
Hold the button down. Release the button to stop the lifting operation.
Button
4
- Switch truck alignment (LEFT / RIGHT / MIDDLE)
Operation Information
LEFT / RIGHT:
Briefly push the button.
Can only be executed when the truck is stationary.
MIDDLE:
Long press the button
(min. ½ sec.)
Button
5
- Move the truck stop position next to the operator
Operation Information
Briefly push the button.
Moves the position at which the truck automatically stops
next to the operator along to the next position.
Can only be executed during "
Assistance
mode
PAUSED".
Components of the iGo neo
3
Remote control
50 50108046112 EN - 07/2020 (03)