Still OPX 20, Supplement To The Standard Operating Instructions

Page: 16 / 140

CAUTION
Danger from the optical safety systems fogging up
when moving between warm areas and cold areas
During use, ensure that the optics covers (inspection
windows) on the movement tracking sensors, on the
foot protection sensors and on the safety laser scan-
ner do not fog up.
If the optics cover of the safety laser scanner fogs
up, the truck may respond by initiating an emergency
stop.
–
Clean any fogged-up optics covers before starting
operation in
Assistance
mode (see the chap-
ter entitled "Cleaning").
Requirements for load carriers and
loads
Load carriers (pallets, crates, trolleys) that are
wider than the truck (max. 80 cm) must not be
transported in
Assistance
mode.
NOTE
As an option, trucks can be equipped or retro-
fitted for load carriers with a width of up to
100 cm.
The weight and type of load must conform to
the specifications in the original operating in-
structions for the series-production truck.
Load carriers and loads must not protrude be-
yond the lateral dimensions of the truck con-
tour. The load must not protrude beyond the
load carrier in a longitudinal or lateral direc-
tion.
The stability of the truck must not be jeopar-
dised by the weight and height of the load, in-
cluding when cornering.
The load must be secured so that it cannot fall
from the truck or slip and protrude beyond the
lateral truck contour, including when corner-
ing. The load must be stacked carefully, with
the centre of gravity as low as possible.
Load carriers and loads that do not meet
these specifications may be moved in
As-
sistance
mode only if the truck safety devi-
ces are adjusted in advance by the
Foreword
1
Using the iGo neo
8 50108046112 EN - 07/2020 (03)