Still OPX 20, Supplement To The Standard Operating Instructions

Page: 77 / 140

Keeping roadways clear of obsta-
cles
DANGER
Risk of accident in the event of additional work be-
ing performed in the roadway that could impede
Assistance
mode, e.g. in the form of people on
ladders and workshop hoists.
–
If additional work is being performed in the work-
ing area, close off the roadways using cones at a
maximum distance of 1.0 m.
–
The cones must have a minimum height of
200 mm so that they can be reliably detected by
the safety laser scanner.
CAUTION
Increased danger of collisions with objects that the
safety laser scanner cannot detect.
The safety laser scanner covers only the area close
to the ground. Objects in the roadway that extend
more than approx. 9 cm in height above the ground
pose an increased risk of accidents. The truck does
not brake automatically in such instances.
–
Before moving the truck, check the roadway for
obstacles that the safety laser scanner cannot de-
tect. Pay particular attention to objects that extend
laterally into the roadway. Clear the roadway
–
Pay attention to cables, ladders and workshop
hoists that cross the roadway. Remove these ob-
stacles
–
Pay attention to half-open roll-up doors as the
safety laser scanner cannot detect half-open roll-
up doors.
The roadways for driving in
Assistance
mode must be level and free of obstacles in
order for the safety laser scanner to reliably
detect the working environment.
–
Before moving the truck, check the roadway
for any obstacles. Clear the roadway
Operating the iGo neo
4
Safety regulations in "Assistance" mode
69 50108046112 EN - 07/2020 (03)