manualshive.com logo in svg

Still OPX 20, Supplement To The Standard Operating Instructions, Page: 40 / 140

Share
Download
Still OPX 20 Supplement To The Standard Operating Instructions Download Page 40

Safety tests

Regular safety inspection of the

truck

Safety inspection based on time and ex-

traordinary incidents

The operating company must ensure that the

entire truck is inspected by a qualified person

at least once a year or after unusual incidents.
As part of this testing of the entire truck, the

condition and function of the components

used for 

Assistance

 mode must also be

checked.
The testing of these components may be per-

formed only by the authorised service centre.

The person performing the testing in the au-

thorised service centre must have sufficient

knowledge and experience to be able to as-

sess the condition of the truck and the effec-

tiveness of the devices according to technical

conventions and the principles for testing in-

dustrial trucks. The basis for the additional

testing is provided by the separate "Assis-

tance" test log book.
In addition to the test log for the entire truck,

the authorised service centre prepares a sep-

arate "Assistance" test log. The "Assistance"

test log contains the test results for the com-

ponents used for 

Assistance

 mode. The

results of the testing must be retained at least

until a further two inspections have been car-

ried out.
It is the responsibility of the operating compa-

ny to have defects rectified immediately by the

authorised service centre.

Emissions

 NOTE

The emissions values correspond to the val-

ues listed in the standard operating instruc-

tions.

Safety

2

Safety tests

 32

50108046112 EN - 07/2020 (03)

Summary of Contents for OPX 20













































































































































Reviews:

No comments