Still OPX 20, Supplement To The Standard Operating Instructions

Page: 106 / 140

Cleaning the components
used for "Assistance" mode
CAUTION
If water penetrates the electrical system, there is a
risk of a short circuit occurring!
–
Never clean the components used for
Assis-
tance
mode using devices such as high-pres-
sure cleaners or rotating brushes.
–
While cleaning the rest of the truck, avoid cleaning
the components used for
Assistance
mode
and only clean these components in accordance
with the instructions specified below.
CAUTION
Risk from damage to electrical components when
cleaning!
Only the authorised service centre is permitted to
clean the components used for
Assistance
mode
inside the truck.
–
Contact the authorised service centre.
CAUTION
Risk of component damage!
If the battery male connector is disconnected while
the truck is switched on (under load), an arc will be
produced. This can lead to erosion at the contacts,
which considerably shortens the service life of the
contacts.
–
Switch off the truck before the battery male con-
nector is disconnected.
–
Do not disconnect the battery male connector
while the truck is switched on, except in an emer-
gency.
Preparing the components used for "As-
sistance" mode for cleaning
Before cleaning, ensure that the truck cannot
move.
–
Park the truck securely on a level surface.
–
Disconnect the battery male connector.
–
Actuate the emergency off switch.
–
Contact the authorised service centre to ar-
range for the components used for
Assis-
tance
mode inside the truck to be
cleaned.
Cleaning
6
Cleaning the components used for "Assistance" mode
98 50108046112 EN - 07/2020 (03)