Steris InnoWave Pro Operator'S Manual Download Page 83

Page: 83 / 200

6.6

The Xi Basket

The Xi Basket is designed for use ONLY
with

Vinci

EndoWrist

robotic

instruments. NO other types of instruments
should be used with this basket. The basket
total capacity is six Xi instruments. This
basket

CANNOT

stapler

instrument -

processing of Xi stapler

instruments can ONLY be performed with
the Xi Multi basket. See

The Xi Multi Basket

on page 78.

6.6.1

Xi Basket — Attaching and Detaching Hoses

The Xi Basket is supplied with a set of hoses designed to provide quick connection
to instruments. ONLY the hose set supplied with the Xi Basket should be used.
Other hoses are NOT recommended.

Hoses are color-coded. Only attach a hose to a port of the corresponding color.

To attach a hose to a port, push the hose into
the port until the retaining clip 'clicks' into place.

INSTRUMENT BASKETS

InnoWave Pro Sonic Irrigator

Operator Manual

Summary of Contents for InnoWave Pro









































































































































































































Search results

Summary of Contents for InnoWave Pro

Reviews:

Related manuals for InnoWave Pro

Brands by name

Popular brands

Steris InnoWave Pro, Operator'S Manual

Search results

Summary of Contents for InnoWave Pro

Reviews:

Related manuals for InnoWave Pro

Brands by name

Popular brands