Steris InnoWave Pro, Operator'S Manual

Page: 100 / 200

The wash program that the sonic irrigator uses
for the next wash cycle is shown on the
Load Instruments screen. The sonic irrigator
defaults to the wash program last used: to
select a different wash program, follow the
procedure below.
1. From main menu, touch or repeatedly
until the wash program symbol is centered
and Select Program appears above it.
2. At the bottom of the screen, touch to cycle up through wash programs, or touch
to cycle down through wash programs. Cycle through wash programs until the
desired wash program appears on the display below the wash program symbol. For
details of available wash programs, see
Wash Programs on page 155.
7.3 Docking Baskets into the Carrier (semi-automated)
1. Visually confirm that the wash program shown on the display is the one required for
the processing of instruments, and that it is suitable for the basket type and basket
loading.
2. If the carrier is closed, or partially open, it
MUST be fully open for the carrier loading
sequence to begin. Use either the foot pedal or
touchscreen controls to fully open the carrier.
90 PERFORMING A WASH CYCLE
InnoWave Pro Sonic Irrigator Operator Manual