Steris InnoWave Pro, Operator'S Manual

Page: 152 / 200

12.1 Diagnosing Error Codes
Use the table below to diagnose and remedy error codes reported on the display.
Error
Code
Error Message Description
1 Mains power
removed Mains supply to equipment was interrupted during a cycle.
Turn equipment back on and repeat cycle.
If problem persists have electrician or qualified technician
inspect electrical connection.
2 Chamber overflow Make sure drain is not blocked. See step 2 of Cleaning and
Inspection Before Every Wash Cycle on page 88.
Make sure instruments are not blocking drain.
Make sure non-foaming chemical is being used. See
Preparing Chemicals on page 25.
Make sure water pressure is not too high. See Viewing and
Editing Wash Program Parameters on page 128.
If problem persists, contact supplier to arrange a qualified
technician inspection.
3 Drain timeout Make sure filter is not clogged. See step 2 of Cleaning and
Inspection Before Every Wash Cycle on page 88.
Make sure instruments are not blocking drain.
Make sure drain hose is not kinked or restricted, and that
site drain is not blocked.
Make sure non-foaming chemical is being used. See
Preparing Chemicals on page 25.
4 Chamber
temperature sensor
mismatch Repeat cycle.
If problem persists, contact supplier to arrange a qualified
technician inspection.
Table 12.1 Error Codes and Remedy Actions
142 TROUBLESHOOTING
InnoWave Pro Sonic Irrigator Operator Manual