Steris InnoWave Pro, Operator'S Manual

Page: 140 / 200

IMPORTANT
Sonic activity during the degassing and washing stages of a wash program
can increase the temperature of the tank water at a rate up to 0.5 °C/min.
(0.9 °F/min.).
Setting a hot wash cycle with a long period of degassing and a long duration
wash stage can cause the tank water to exceed the maximum permitted
temperature, resulting in the system aborting the cycle and reporting
error code 23 ( water temperature too high ).
If this occurs, the wash cycle parameters should be changed to reduce the
degassing
and/or washing periods, and/or increase the set wash
temperature.
Program Name
This screen only appears for unlocked wash
programs, and allows the wash program name
to be edited using the on-screen keyboard. The
program name is limited to the display width
and a maximum of 30 characters.
Pre-wash
On the left is the duration of the pre-wash
stage in minutes (0 to 20). On the right is the
number of times the pre-wash stage is
performed (0 to 3). If either value is zero, pre-
wash is not performed.
Sonic Wash
This parameter sets the fill level for the main
sonic wash stage.
All Carriers means tank fills
to submerge all baskets. Middle Carrier sets
the tank fill to submerge up to the middle
basket.
Bottom Carrier sets the tank fill to
submerge only the bottom basket
130 THE SUPERVISOR MENU
InnoWave Pro Sonic Irrigator Operator Manual