Staubli CS8C, Instruction Manual

Page: 41 / 248

CS8C © Stäubli 2009 –
D28070504A
41 / 248
Chapter 4 - Installation
4.3.
UNPACKING AND HANDLING
4.3.1.
PACKAGING FOR THE
CS8C
CONTROLLER
4.3.2.
HANDLING OF PACKING
By pallet truck under base
(2)
.
•
Fit a sling
(4)
(fabric sling
200 kg / 442 lb
) using hooks
(6)
between the lifting rings
(5)
on the controller
(3)
and
the hook on the lifting tackle
(7)
. The hooks
(6)
must also stand up to
200 kg / 442 lb
.
•
Slowly lift the controller using the lifting tackle and set it down beside the base
(2)
.
•
The lifting rings
(5)
on the controller are removable.
•
Take out the box containing the MCP and the upper wedges.
•
Take out the documentation and side wedges.
•
Take out the box containing the connecting cable.
CS8C
FOR
TX, RS CS8C
FOR
RX160
Standard packaging
L x H x D
Gross weight
900 x 640 x 570 mm
354 x 252 x 224 in
70 kg / 155 lb
900 x 815 x 570 mm
354 x 321 x 224 in
80 kg / 177 lb
International packaging
L x H x D
Gross weight
990 x 755 x 610 mm
390 x 297 x 240 in
84 kg / 185 lb
990 x 930 x 610 mm
390 x 366 x 240 in
94 kg / 208 lb
Net weight With transformer:
50 kg / 110 lb
Without transformer:
31 kg / 68lb
60 kg / 132 lb
4.3.3.
UNPACKING AND INSTALLING
THE CONTROLLER
•
Move the packing case as near as possible to the
installation site.
•
Open the case
(1)
.
7
4
6
5
3
1
2