PolosSpin150i/200i
rev.: 1.0
Operating instruction
SPS-Europe B.V.
page
27
JH131115
6.4 Installation procedure
WARNING!
Please read completely the manual, containing required safety instructions,
carefully prior to installation of the unit.
WARNING!
All personnel involved in system utilization must be qualified accordingly relevant
task, knowing the perils and being able to prevent them by applying suitable safety
measures.
Our products are continuously modified and improved due to innovation, legal
requirements and standards. As a consequence, the information given in this
documentation may not accurately reflect every detail of the system actually
delivered.
Note:
please refer to
appendixes, drawings and section technical data
for
details or contact
SPS-Europe B.V.
in case of uncertainty.
6.5 Positioning
Position the
Polos
spin processor on a stable, flat, vibration-free and safe surface
not to be deformed under the weight of the unit and eventual accessories; the unit
must not be deformed either.
For service purpose is recommended to leave at least 25cm available space on
back, left and right sides.
CAUTION!
It is at the user
’s responsibility ensuring that the workplace is open, without
hazardous point and with free access to emergency exit before activating the unit.
Verify that in designated position all tube connected are free to move and no sharp
bent or choking are present.
DANGER!
Positioning the unit on a surface that is not stable, flat, vibration-free, safe and
undeformable may cause serious injuries.
Note:
please refer to
appendixes, drawings and section technical data
for
details or contact
SPS-Europe B.V.
in case of uncertainty.
