PolosSpin150i/200i
rev.: 1.0
Operating instruction
SPS-Europe B.V.
page
9
JH131115
2.3 Symbols used on system
The following safety instructions (caution and command symbols) may be seen on
the system:
caution
– risk of danger
caution
– risk of electric shock
caution
– risk of hand injury
caution
– moving parts
caution
– risk of corrosion
use eye protection
Note:
The above symbols refer to
SPS-Europe B.V.
components and parts.
However, components and parts of sub suppliers may show other symbols, not
expressly mentioned or referred to in this manual.
DANGER!
The owner of the system is responsible to place adequate danger signals and labels
in suitable places.
This applies in particular to signals and labels concerning process chemicals used.
Irrespective of number of caution symbols and information placed on or around the
system all safety instructions of this manual have to be observed.
