PolosSpin150i/200i
rev.: 1.0
Operating instruction
SPS-Europe B.V.
page
42
JH131115
Start a recipe
Touch the start button
(11)
in order to execute the selected recipe.
After recipe start, the current step button
(5)
lights in green.
The graph
(4)
will show in blue the intended progression of the recipe and with
red/yellow line the real progression of the recipe is shown, switching colour at every
cycle.
The output indicators
(6)
will light green according to program parameters and the
actual status values like the spin speed are shown in bold in the recipe detail
(7)
.
On the recipe status bar
(2)
at the top of the screen, the current cycle is shown in
bold.
The command button
(10)
,
(11)
and
(12)
will be replaced by following sign:
Abort a recipe
When a recipe is active, touching
the “stop button”
(11)
will cause the motor to stop
and the valves or relays to close.
The system will return to run screen in idle mode.
Suspend a recipe
When a recipe is active, touching
the “suspend button”
(10)
will cause the motor to
stop and the valves or relays to close.
The command button
(10)
,
(11)
and
(12)
will be replaced by following sign:
Touching the continue button
(10)
, the recipe will continue is normal progress.
Touching the stop button
(11)
, the recipe will be aborted and system will return to
the start screen of the recipe leaving the unit in idle mode.
After suspending a recipe, the operator can only continue or stop the recipe; no
other operation will be possible at this point.
10 11 12
10 11 12
