PolosSpin150i/200i
rev.: 1.0
Operating instruction
SPS-Europe B.V.
page
15
JH131115
DANGER!
In case of emergency the stop button must be approachable immediately.
Do not position any object between operator and emergency button.
DANGER!
Due to electrical charging plastic components or wiring, solvents and process
chemicals could be ignited. Therefore, the system and its components have to be
grounded.
Note:
in case of insufficient grounding or of damaged ground conductor make sure
that the system will be inoperable and secure it against unauthorized or
unintentional operation.
DANGER!
In case fuses have to be replaced make sure that only fuses of same type and
current rating will be used.
Under no circumstances use makeshift fuses or short-circuit any fuse holders.
CAUTION!
Electrostatic discharges can cause damage to parts. When handling electronic
components several precautions are essential:
Wear a grounded wrist strap or work on a grounded static-dissipating work surface.
Leave electronic components and printed circuit boards in their original packaging
until final installation.
Handle electronic components by their body or case, avoid touching of leads.
Keep electronic components and printed circuit boards away from such static
generating materials as vinyl, plastic bags, etc.
Whenever it is likely that the system is no longer electrically safe, make it
inoperable and secure it against any unauthorized or unintentional operation.
Chemicals hazards:
Chemicals are provided and applied by the user. Proper handling of chemicals is
the user’s responsibility.
Advice contained in this section is intended to supplement, not to supersede, the
safety instructions provided by chemicals suppliers nor the general safety code of
behavior prevailing in the user’s country.
DANGER!
Chemicals
Customer has full responsibility and liability to assure that all wetted materials of the
system are resistant to the chemical(s) applied.
