PolosSpin150i/200i
rev.: 1.0
Operating instruction
SPS-Europe B.V.
page
59
JH131115
10 Decommissioning, storage and disposal
10.1 Decommissioning
Prior to storage, system needs to be decommissioned following procedure
described below.
Rinse chamber, tanks (if available), canisters (if available) and all dispensing
system and plumbing with DI-water.
With liquid aspirator remove all residual liquid inside the unit.
Purge chamber, tanks (if available), canisters (if available) and all dispensing
system and plumbing with nitrogen.
Turn off the unit switching main button on rear side.
Reposition all packaging material removed during installation procedure.
10.2 Storage
The system can be stored safely under following conditions:
without any liquids (process chemicals etc.)
ambient temperature - 10°C to + 60°C
ambient relative humidity max. 80%, no condensation
dust-free and protected (eventually packed up)
When removing from storage, prior to installation, keep the system for at least 24
hours under approved operating conditions.
System start up have to be performed by
SPS-Europe B.V.
service personnel or
persons qualified accordingly.
10.3 Disposal of the system
At the end of its life span the system has to be disassembled and disposed
according to applicable laws and regulations.
Upon disposal, consider the following:
Separate materials.
Forward metals to a recycling process.
Forward plastic parts to a recycling process.
Forward electrical/electronic parts to a special waste disposal process.
Recommendation
: Get in contact with a waste disposal professional.
10.4 Disposal of Chemicals
Chemicals used in processes or cleaning have to be disposed according to
applicable laws and regulations.
