22
VARIABLE SPRAY LENGTH—WITH REPEAT
This timing mode is used to create a continuous repetition of spray pulses for a variable time. The duration of the
repetition depends on the specific time delays between the rising and falling edge of the trigger input.
Variable spray length with repeat diagram
PARAMETER
VALUE
Start Delay
In seconds (s) or meters (m)
-
requires speed sensor
Stop Delay
In seconds (s) or meters (m)
-
requires speed sensor
Repeat Off Period
In seconds (s) or meters (m)
-
requires speed sensor, set value greater than 0
Repeat On Period
In seconds (s) or meters (m)
-
requires speed sensor, set value greater than 0
Spray Period
Set value equal to 0
Anticipator Time
In seconds (s)
Follower Time
In seconds (s)
