Spirent SmartBits System Reference Manual Download Page 106

Page: 106 / 278

Chapter 9: Ethernet Cards

LAN Series Modules

SmartBits System Reference

LAN Series Modules

LAN-3100A and LAN-3200A Series Modules

•

LAN-3100A 8-port 10/100 Mbps full/half duplex module

•

LAN-3150A 8-port 10/100 Mbps RMII/SMII full/half duplex

•

LAN-3200A 2-port 1000 Mbps full duplex (multi-mode) module

•

LAN-3200As 2-port 1000 Mbps full duplex (single mode) module

Card Type:

10/100/1000 Mbps Ethernet modules.

Where Used:

SMB-600 and SMB-6000B.

Applications
Supported:

SmartWindow, SmartLib, SmartApplications, and AST II.

Devices Tested:

Layer 2 and Layer 3 switches and routers; gigabit Ethernet backbones.

Test Objective:

A packet-based traffic generator to test performance, conformance, and interoperability of
devices based on industry standard RFCs testing.

Interoperability:

Upstream traffic and throughput testing can be performed by using a LAN-3200A module
in combination with the LAN-3100A module.

Summary of Contents for SmartBits System























































































































































































































































































Search results

Summary of Contents for SmartBits System

Reviews:

Related manuals for SmartBits System

Brands by name

Popular brands

Spirent SmartBits System, Reference Manual

Search results

Summary of Contents for SmartBits System

Reviews:

Related manuals for SmartBits System

Brands by name

Popular brands