manualshive.com logo in svg

Spirent SmartBits System, Reference Manual

The Spirent SmartBits System is an advanced network testing solution designed to optimize performance and reliability. Unlock the full potential of this powerful tool with the comprehensive "Reference Manual" available for "free" download from our website manualshive.com. Discover in-depth insights and unleash the full potential of your network testing experience.

Share
Download
background image

Contents

iv

SmartBits System Reference

Chapter 3

Multiple Users Accessing a Chassis

27

Requirements for Multi-User Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Preparing for Multi-User Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
How Does the Multi-User Feature Work?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

In SmartWindow, with SMB-600 and SMB-6000B Multi-Users . . . . . . . . . . . . . . . . . . . . . 31
In SmartWindow, with SMB-2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
In SmartFlow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
In SmartCableModem Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
In SmartxDSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Chapter 4

Maintenance and Upgrade Procedures

39

Downloading New Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Adding Cards to a SmartBits Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Converting the SmartBits Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Changing Chassis Timeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Changing Chassis Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Chapter 5

Core Software Applications

43

Overview of Core Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
SmartWindow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
SmartLib . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
SmartApplications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Chapter 6

Optional Applications

51

Special Feature Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Required Firmware Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Local Multiple Chassis Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Remote Multiple Chassis with GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
SmartSignaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
SmartMulticastIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
SmartxDSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
SmartFlow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
SmartVoIPQoS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Advanced Switch Tests for Ethernet (AST II) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Virtual LAN Advanced Switch Tests (VAST) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
SmartCableModem Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
ScriptCenter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
SmartTCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Summary of Contents for SmartBits System























































































































































































































































































Reviews:

No comments

Related manuals for SmartBits System

Eagle Eye DM Series Field Calibration Manual preview
DM Series
Brand: Eagle Eye Pages: 3
VALTRONICS 2011 Instruction Manual preview
2011
Brand: VALTRONICS Pages: 13
JIANGSU SI Series Operation Manual preview
SI Series
Brand: JIANGSU Pages: 8
E Instruments 1500 Quick Manual preview
1500
Brand: E Instruments Pages: 2
Badger Meter iSonic 4000 Installation And Operation Manual preview
iSonic 4000
Brand: Badger Meter Pages: 47
Eaton Network Card-MS Quick Start Instructions preview
Network Card-MS
Brand: Eaton Pages: 26
OHAUS ST300 Instruction Manual preview
ST300
Brand: OHAUS Pages: 26
Keller CellaCast PA8 Series Quick Manual preview
CellaCast PA8 Series
Brand: Keller Pages: 12
jenway 6405 Operating Manual preview
6405
Brand: jenway Pages: 52
Daewoo D-60 User Manual preview
D-60
Brand: Daewoo Pages: 17
Omega DP41-W User Manual preview
DP41-W
Brand: Omega Pages: 170
Fora GTel Owner'S Manual preview
GTel
Brand: Fora Pages: 64
NIEUWKOOP EC-95 Quick Manual preview
EC-95
Brand: NIEUWKOOP Pages: 2
Laserworld Rainbow RTI-Nano Series Manual preview
Rainbow RTI-Nano Series
Brand: Laserworld Pages: 25
Seneca S311D-XX-H Manual preview
S311D-XX-H
Brand: Seneca Pages: 2
Korg OASYS CX-3 Manuald Tour preview
OASYS CX-3
Brand: Korg Pages: 4
Tenma 72-14400 User Manual preview
72-14400
Brand: Tenma Pages: 7
iDigit A570 Ambient Monitor Instruction Manual preview
A570 Ambient Monitor
Brand: iDigit Pages: 15

Brands by name

Popular brands

Load more brands