manualshive.com logo in svg

Spirent SmartBits System, Reference Manual

The Spirent SmartBits System is an advanced network testing solution designed to optimize performance and reliability. Unlock the full potential of this powerful tool with the comprehensive "Reference Manual" available for "free" download from our website manualshive.com. Discover in-depth insights and unleash the full potential of your network testing experience.

Share
Download
background image

Contents

vi

SmartBits System Reference

Packet over SONET (POS) Module Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Packet over SONET (POS) LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
POS-3500/3502 Series Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
POS-3504As Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

Chapter 11

ATM Cards

143

ATM Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
ATM Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
ATM LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
ATM SmartCards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
ATM Cell Header . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
ATM Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
ATM Line Event Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
ATM ILMI Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
ATM LANE Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
ATM ARP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
ATM Line Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160

Chapter 12

WAN Cards

163

WAN Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164

Feature Summary of WAN Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165

WAN LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
WN-3405, WN-3415, WN-3420A SmartCards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
WN-3441A, WN-3442A, WN-3445A
SmartCards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169

Chapter 13

Token Ring Cards

171

Token Ring Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Token Ring LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Token Ring Counters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
TR-8405 Token Ring 4/16Mbps SmartCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Token Ring Operational Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Ring Protocols Used by the TR-8405 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185

Chapter 14

Fibre Channel Cards

189

Fibre Channel Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
FBC-3601A, FBC-3602A Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
Fibre Channel LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193

Summary of Contents for SmartBits System























































































































































































































































































Reviews:

No comments

Related manuals for SmartBits System

Campbell KH20 User Manual preview
KH20
Brand: Campbell Pages: 22
Campbell EE181 Instruction Manual preview
EE181
Brand: Campbell Pages: 32
Campbell CS511 Instruction Manual preview
CS511
Brand: Campbell Pages: 40
Campbell CR3000 Micrologger Quick Using Manual preview
CR3000 Micrologger
Brand: Campbell Pages: 12
R.M. Young 27106T Quick Start Manual preview
27106T
Brand: R.M. Young Pages: 8
Campbell 27106T Product Manual preview
27106T
Brand: Campbell Pages: 21
ICM Controls ICM450 Installation, Operation & Application Manual preview
ICM450
Brand: ICM Controls Pages: 8
MadMan EMS-3 Operating Manual preview
EMS-3
Brand: MadMan Pages: 37
MADDALENA microCLIMA U Installation And Operating Instructions preview
microCLIMA U
Brand: MADDALENA Pages: 5
Weller WA2000 Instruction Manual preview
WA2000
Brand: Weller Pages: 9
VEE GEE BX-3 Operation Manual preview
BX-3
Brand: VEE GEE Pages: 2
WalkLAB HP9000 Operation Manual preview
HP9000
Brand: WalkLAB Pages: 16
Kawai DX800 Owner'S Manual preview
DX800
Brand: Kawai Pages: 40
Yamaha Electone Stagea ELS-01C Owner'S Manual preview
Electone Stagea ELS-01C
Brand: Yamaha Pages: 248
ABB ProcessMaster FEP630 series Manual preview
ProcessMaster FEP630 series
Brand: ABB Pages: 92
National Instruments PXIe-5764 Getting Started Manual preview
PXIe-5764
Brand: National Instruments Pages: 15
Datakom DV-0101 Quick Start Manual preview
DV-0101
Brand: Datakom Pages: 2
PROLEC EA Heightmaster + Operator'S Manual preview
EA Heightmaster +
Brand: PROLEC Pages: 38

Brands by name

Popular brands

Load more brands