Spirent SmartBits System Reference Manual Download Page 57

Page: 57 / 278

Chapter 5: Core Software Applications

SmartApplications

SmartBits System Reference

•

Test unidirectional or bi-directional.

•

Test one-to-one port pairs, one-to-many ports, or many-to-one port pairs.

•

Simulate a router with next-hop capability per RFC-2544.

•

Use GPS with multiple remote SmartBits chassis for end-to-end performance testing,
including remote one-way latency measurements.

Test Results:

•

Tests results are displayed in real time.

•

Error log provides debug information.

•

Charting capability allows customization of results.

•

Choose horizontal tabular report format or traditional non-tabular format.

•

Cut-through and store-and-forward latency measurements are displayed individually.

Requirements:

•

An SMB-200, SMB-2000, SMB-600, or SMB-6000B chassis with the appropriate
SmartCards or modules.

•

Proper cabling.

•

An IBM or compatible Pentium PC running Windows 98 or NT.

•

An RS-232 modem cable or an RJ-45 straight-through cable (Ethernet) and a 10 Mbps
half duplex Ethernet controller card (in the PC).

Summary of Contents for SmartBits System























































































































































































































































































Search results

Summary of Contents for SmartBits System

Reviews:

Related manuals for SmartBits System

Brands by name

Popular brands

Spirent SmartBits System, Reference Manual

Search results

Summary of Contents for SmartBits System

Reviews:

Related manuals for SmartBits System

Brands by name

Popular brands