Spirent SmartBits System Reference Manual Download Page 120

Page: 120 / 278

Chapter 9: Ethernet Cards

ST Series SmartCards

112

SmartBits System Reference

ST Series SmartCards

ST-6410 SmartCards

•

ST-6410 10 Mbps Ethernet Full Duplex

Card Type:

10 Mbps Ethernet Full Duplex SmartCard (RJ-45).

Where Used:

SMB-200 and SMB-2000; one port per card; each card occupies one slot in a chassis.

Applications
Supported:

SmartWindow, SmartLib, and SmartApplications, and AST.

Devices Tested:

Ethernet devices.

Test Objective:

A packet-based traffic generator for Ethernet performance measurement and
interoperability testing.

Additional
Features:

Additional features can be found in the following tables:

•

Table 9-2, “Min/Max Frame Lengths in Bytes for Ethernet Cards,” on page 84

•

Table 9-3, “10/100 Mbps Ethernet Cards – Feature Set for ST and SX Cards,” on
page 86

Summary of Contents for SmartBits System























































































































































































































































































Search results

Summary of Contents for SmartBits System

Reviews:

Related manuals for SmartBits System

Brands by name

Popular brands

Spirent SmartBits System, Reference Manual

Search results

Summary of Contents for SmartBits System

Reviews:

Related manuals for SmartBits System

Brands by name

Popular brands