Spirent SmartBits System Reference Manual Download Page 22

Page: 22 / 278

Chapter 2: System Architecture

SmartBits Chassis Models and Cards

SmartBits System Reference

SmartBits Chassis Models and Cards

SmartBits chassis models are available in several different models. The chassis you choose
will depend on the requirements of your system.

SmartCards

are custom-designed printed circuit boards (PCBs) that fit within a SmartBits

chassis to generate, capture and track network traffic. They fit into the SMB-10, SMB-
2000, and SMB-200 chassis.

Modules

consist of one PCB, but have a higher port density than the SmartCard. Each card

is attached to a tray specially designed for the SMB-600 and the SMB-6000B.

The term

“card”

can refer to any SmartCard or module.

The various models of SmartBits chassis are listed in

Table 2-1

SmartBits Chassis SmartCards/Modules Applications

Model

1 The SMB-1000, an older model chassis, requires an upgrade to the SMB-2000

level to use current SmartCards and software.

Max #
Ports

Card Types

2 The different card types are not interchangeable; namely, the SmartCards are not

interchangeable with modules.

Available
Technologies

Available Core and
Software
Applications

SMB-200

SmartCards

All

3 All technologies except POS (Ethernet, ATM, Frame Relay, Token Ring).

All

SMB-2000

SmartCards

All

SMB-600

Modules

Eth + POS

4 Eth + POS = Fast and Gigabit Ethernet and Packet over SONET (POS).

Core Set+(5)

SMB-6000B

Modules

Eth + POS

Core Set+ (5)

SMB-10

5 The SMB-10 “slave” chassis is controlled and dependent on an SMB-2000 chassis.

SmartCards

All

Summary of Contents for SmartBits System























































































































































































































































































Search results

Summary of Contents for SmartBits System

Reviews:

Related manuals for SmartBits System

Brands by name

Popular brands

Spirent SmartBits System, Reference Manual

Search results

Summary of Contents for SmartBits System

Reviews:

Related manuals for SmartBits System

Brands by name

Popular brands