Spirent SmartBits System Reference Manual Download Page 157

Page: 157 / 278

Chapter 11: ATM Cards

ATM SmartCards

SmartBits System Reference

149

Encapsulation
Modes:

•

LAN Emulation Client 1.0.

•

RFC 1483 (LLC/SNAP).

•

RFC 1577 (Classical IP over ATM).

•

RFC 2364 (PPP over AAL5).

•

Null Encapsulation: Generation of user-definable frames (such as 40-byte IP) in
single cell/multiple cells.

•

Protocol support for ILMI, UNI 3.x, LAN Emulation Client 1.0, LLC/SNAP per RFC
1483, and Classical IP per RFC 1577, PPP per RFCs 1661 and 2364.

AT-9034B and
AT-9045B
Special Features

The AT-9034B and AT-9045B SmartCards have the following feature enhancements:

•

Supports SmartxDSL version 1.01 and higher.

•

2K streams (compared to 256).

•

Per VC triggers plus multi-burst transmit mode capabilities.

•

AAL5 CRC-32 error generation.

•

PPP support.

Specifications:

See

Table 11-3 on page 147

Summary of Contents for SmartBits System























































































































































































































































































Search results

Summary of Contents for SmartBits System

Reviews:

Related manuals for SmartBits System

Brands by name

Popular brands

Spirent SmartBits System, Reference Manual

Search results

Summary of Contents for SmartBits System

Reviews:

Related manuals for SmartBits System

Brands by name

Popular brands