Spirent SmartBits System Reference Manual Download Page 60

Page: 60 / 278

Chapter 6: Optional Applications

Special Feature Support

SmartBits System Reference

Special Feature Support

The following list highlights certain features that may or may not be available with each
application: (see also

Required Firmware Version

below).

•

SmartMetrics

. Refers to SmartMetrics cards and associated advanced tracking and

results.

•

GPS

. The Global Positioning System accessory with an GPS receiver and cables,

used to synchronize the timing between SmartBits chassis at remote locations.

•

Multi-User

. Refers to multiple users or programs accessing the same SmartBits

chassis at the same time. This feature identifies which cards are available to be used,
and which cards are reserved by other users.

•

Multi-Chassis

. Displays all available ports of multiple connected SmartBits chassis.

•

Test API

. A programming library that duplicates the functions of a specific GUI

application information.

Required Firmware Versions

If you wish to use the following features with SmartBits applications, please check your
SmartBits chassis for the following required version levels:

•

Multi-chassis feature support

. Chassis firmware version 6.08 and higher

•

Multi-user feature support

. Chassis firmware version 6.50 and higher

•

SMB-200 support

. Chassis firmware version 6.12 and higher

Summary of Contents for SmartBits System























































































































































































































































































Search results

Summary of Contents for SmartBits System

Reviews:

Related manuals for SmartBits System

Brands by name

Popular brands

Spirent SmartBits System, Reference Manual

Search results

Summary of Contents for SmartBits System

Reviews:

Related manuals for SmartBits System

Brands by name

Popular brands