Spirent SmartBits System, Reference Manual

Page: 70 / 278

Chapter 6: Optional Applications
Advanced Switch Tests for Ethernet (AST II)
62 SmartBits System Reference
Advanced Switch Tests for Ethernet (AST II)
SmartAPI for Advanced Switch Tests II provides test routines that determine the speed
and dependability of network switches, bridges, and routers.
The following cards can be tested using the following SmartBits chassis:
•
In SMB-200/2000:
– GX-1405B, Gigabit Ethernet
– GX-1405BS, Gigabit Ethernet, Single Mode
– L3-6710, 10 Base-TX, Layer 3
– ML-7710, 10/100 Base-TX, SmartMetrics
– ML-7711, 100 Base-FX Fiber, SmartMetrics
– ML-5710A, 10 Base Ethernet, USB SmartMetrics
– ST-6410, 10 Base-T, Full Duplex
– SX-7205, 100 Mbps Ethernet
– SX-7210, 10/100 Base-TX, VLAN/Data Capture
– SX-7405, VLAN and Capture
– SX-7410, 10/100 Base-TX
– SX-7410B, 10/100 Base-TX
– SX-7411, 100 Base-FX Fiber, VLAN/Data Capture
•
In SMB-600/6000B:
– LAN-3100A, 10/100 Ethernet, Full/Half Duplex
– LAN-3101A, 10/100 Ethernet, 12-port, SmartMetrics
– LAN-3111A, 100 Base-FX Fiber.
– LAN-3200A, 1000 Base Ethernet, Full Duplex, Multi Mode
– LAN-3200As, Full Duplex, Single Mode
– LAN-3201A, 1000 Base Ethernet, Multi Mode, SmartMetrics
– LAN-3201As, 1000 Base Ethernet, Single Mode, SmartMetrics
– LAN-3201B, GBIC, SmartMetrics
– LAN-3710A, 10 Gigabit Ethernet, RMII/SMII
Refer to the SmartAPI for Advanced Switch Tests II located at
http://www.netcomsystems.com/support/documentation.asp for a complete description of
the tests available.
1
Coder/decoder. In VoIP, that part of an integrated circuit on a telephone
network switch that coverts
analog signals to digital signals and vice versa.
Codecs vary in how they represent analog signals digitally.