Spirent SmartBits System Reference Manual Download Page 96

Page: 96 / 278

Chapter 9: Ethernet Cards

Feature Summary of 10/100 Mbps Cards

SmartBits System Reference

Comparison of ML-7710 vs LAN-3101A

The LAN-3101A module is a high-port density version of the ML-7710.

The single-port ML-7710 is used with the SMB-200 and SMB-2000. The 6-port LAN-
3101A module is used with the SMB-600 and SMB-6000B.

SmartLib Differences

SmartLib Version 3.09 and higher,

the following commands are used specifically for

the LAN-3101A and ML-7710:

•

FST_CAPTURE_INFO

(applies to both the ML-7710 and the LAN-3101A).

(None of the other "FST_CAPTURE_n" commands can be used with either the ML-
7710 or the LAN-3101A.)

•

The following command is used to show data integrity errors:

ETH_EXTENDED_COUNTER_INFO

and a parameter

u64RxDataIntegrityErrors

(applies to LAN-3101A).

Summary of Contents for SmartBits System























































































































































































































































































Search results

Summary of Contents for SmartBits System

Reviews:

Related manuals for SmartBits System

Brands by name

Popular brands

Spirent SmartBits System, Reference Manual

Search results

Summary of Contents for SmartBits System

Reviews:

Related manuals for SmartBits System

Brands by name

Popular brands