Spectra Watermakers NEWPORT 400 Mk II, Installation & Owner'S Manual

Page: 9 / 62

9
Plumbi ng
From the in let thru hull to the boost pump modu le and from the boost pump modu le to pump
module inlet use supp lied clear 3/4 (19m m) sp iral suction rated hose.
The outlet of the f i lter assemb ly on the main module to the C lark pu mp as semb ly is under pres-
sure. U se the supplied braided clear viny l hose rated to 150 PSI (11 bar).
From C lark pump br ine di scharge connector use supplied 5/8 (15.9 mm) c lear braided viny l
hose.
On the feed pressure side use the supplied Parker 1/2 tube and fitting s. Use two grab rin gs on
the 1/2 park er tubing. Refer to the park er assembly in structions.
The remote control panel can be mounted anywhere tha t
is dry and convenient. Cut a 4 - 9/16 ” (116 mm) wide by
2- 7/8” (68mm) hi gh openin g for the panel. Lo cat e in an
area that is easily v is ible and easy to manipulate the bu t-
tons. Use only Spectra approved re mote cable.
The cable is not standard LAN cable or phone cord.
Re mot e Cont r ol Panel
Route all hoses and tubes to pr event kink s and r e strictions. Secure
piping away fr om mov ing ob jects such as engine belts and hatches.
Pr event chafe on tubing as r equir ed. T e st and inspect all piping and
hose clamps after several hours of operation.