88
TRAK Machine Tools
Southwestern Industries, Inc.
TRAK TMC Mills with ProtoTRAK RMX CNC Safety, Installation, Maintenance, Service & Parts List
Figure 5.1.8.2b
5.1.9
Servomotor Replacement
The following service codes
must
be performed when a motor is replaced. Tool change heights will be
off in the Z axis and should be adjusted. The machine may crash if these items are not set correctly.
•
Service Code 505
–
Reset the motor index angle (machine may not home properly) and
reset soft limits. Must be redone after any motor is removed.
•
Service Code 501
–
Reset the tool change height. Performed after Z motor axis removal
5.1.9.1
X Axis Servomotor Removal and Replacement
1.
Center X Axis, E-Stop machine and disconnect power to the machine.
2.
Remove right way cover shown in figure 5.1.9.1a, coupling cover and rear motor panel cover for
motor access as shown in figure 5.1.9.1b.
