80
TRAK Machine Tools
Southwestern Industries, Inc.
TRAK TMC Mills with ProtoTRAK RMX CNC Safety, Installation, Maintenance, Service & Parts List
Figure 5.1.4b
5.
Install Cable on SSD card which consists of either two separate cables (power and data) or one
cable with two wires attached. Each cable has a notch on the connector that only permits the
cable to be installed one way due to the matching notch on the memory card and the sizes of the
wires as shown in Figure 5.1.4c.
Figure 5.1.4c
6.
The memory card cable branches into a data and power cables to be connected into the circuit
board behind and below the memory card just installed. The data cable terminates with same
type of notch as used in the large end preventing an error while attaching the connector. The
smaller white power connector has a wide notch with a tab along the bottom which forces the
install only one way as shown in Figure 5.1.4.d.
