2-2
DNW-A220
DNW-A220P
Error messages are described on Section 3-2 in the order of list.
Error List
Code
Message
Page Description
on time data display area
01
REEL TROUBLE
2-4
Tape slacking is detected in the unthreading operation.
02
REEL TROUBLE
2-5
Tape slacking or tape breaking is detected in the SEARCH, FF, or REW mode.
03
REEL TROUBLE
2-6
Tape slacking, or tape breaking is detected in the REC or PLAY mode.
04
REEL TROUBLE
2-7
An malfunctional tape transport speed is detected in the FF or REW mode.
06
TAPE TENSION
2-7
Excessive tape tension is detected in the REC or PLAY mode.
07
CAPSTAN TROUBLE
2-8
Abnormal capstan motor rotation speed was detected in the REC, PLAY, SEARCH, or REW
mode.
Malfunction of capstan FG was detected in the REC or PLAY mode.
08
DRUM TROUBLE
2-8
Malfunction of drum motor is detected.
09
TH/UNTH MOTOR
2-9
Malfunction of threading or unthreading operation is detected.
10
HUMID
2-9
Dew condensation is detected.
12
TAPE TOP SENSOR
2-10
Malfunction of tape top sensor is detected.
13
TAPE END SENSOR
2-10
Malfunction of tape end sensor was detected.
14
FAN MOTOR
2-11
Malfunction of cooling fan motor is detected.
40
DPR-87 BOARD 1
2-11
The abnormal operation of IC on DPR-87 board was detected.
43
DPR-87 BOARD 4
2-12
The abnormal operation of IC (SDRAM) on DPR-87 board was detected.
92
INTERNAL I/F 1
2-12
Abnormality in the interface between SYS1 CPU (on SY-259/259A board) and other CPU/
MPU is detected.
93
CPU INITIALIZE
2-13
Abnormality was detected in the communication between SERVO CPU (SV-194 board) and
DRUM MICOM (SV-194 board).
96
SY NV-RAM ERROR
2-13
The abnormal operation of an NV-RAM (on SY-259/259A board) for the system control system
is detected.
97
SV NV-RAM
2-14
The abnormal operation of an NV-RAM (on SV-194 board) for the servo system is detected.
98
RF NV-RAM ERROR
2-14
The abnormal operation of an NV-RAM (on EQ-72, or DM-114/114P board) for the RF system
is detected.
99
INTERNAL I/F 2
2-15
Abnormality in the interface between SYS2 CPU (on SY-260 board) and SERVO CPU (on SV-
194 board) or MPU (on EQ-72, DM-114/114P, or SDI-23 board) is detected.
m
.
Error codes 01 through 13 detect in the SV-194 board.
Error code 14 detects in the SY-259/259A board.
Error codes 40 through 43 detect in the SY-260 board.
Error codes 92 through 99 detect in the SY-259/259A and/or SY-260 board.
.
There are two error groups of error codes: VTR and OTHERS. If errors occur in multiple error groups, the error message
of each group are switched at two-second intervals.
Also, if multiple errors occur in error group, the priority level of each group display are as follows:
VTR:
97, 02, 03, 04, 07, 06, 01, 09, 08, 10, 12, 13
OTHERS: 92, 96, 98, 99, 93, 40, 43
2-1. Overview of Error Message
