3-52
DNW-A220
DNW-A220P
3-4-5. HOUR METER RESET Menu (M36)
This menu can display and reset the values of the resettable hours meter and thread counter.
Description of LCD monitor
DRUM HOURS:
Indicates the total of drum rotation time. Same as in setup menu ITEM-H12.
TAPE HOURS:
Indicates the total of tape transport time. Same as in setup menu ITEM-H13.
THREAD COUNTERS: Indicates the total of threading count. Same as in setup menu ITEM-H14.
Menu operation
Turn the JOG dial to move the
*
mark.
The contents of the
*
-marked line on the LCD monitor are displayed in a sub LCD.
To reset
The former state cannot be returned when the SET button is pushed for reset operation.
(1) Turn the JOG dial and move the
*
mark to the item to be reset.
(2) Turn the JOG dial in REVERSE (
3
) direction while pressing the search button. = The display value
then becomes zero (“0”).
.
Message “Push SET Button” is displayed on only the LCD monitor when the display value is set
to “0”.
.
To return to the former state, turn the JOG dial in FORWARD (
2
) direction.
(3) If there are other items to be reset, repeat steps (1) and (2).
(4) Push the SET button to save the reset data.
.
Message “Saving ...” is displayed on only the LCD monitor. If no abnormality is found, the
display changes to “Save Complete” after a few seconds.
To turn off “Save Complete”, turn the JOG dial.
3-4. OTHERS CHECK Mode (M3)
3-4-5. HOUR METER RESET Menu (M36)
M3:OTHERS
M36:HOUR METER RESET
DRUM HOURS 234
TAPE HOURS 123
THREAD COUNTER 2345
*