1-42
DNW-A220
DNW-A220P
1-15. Fixtures and Adjustment Equipment List
1-15. Fixtures and Adjustment Equipment List
1-15-1. Fixtures
n
The tools are used only in the maintenance manual Part 2 are also described.
Fig. Part No.
Name
For use
Description
*
1
A-8316-723-A Extension board (EX-617)
Extension of plug-in boards
P2
A-8321-000-A Extension board (EX-706)
Extension of plug-in boards
P2
2
A-8317-304-A HN-257 mounted circuit board
Tape path alignment
P2
3
J-6035-070-A
Extruction tool (for PLCC socket)
Extruction of PLCC IC
P2
4
J-6080-840-A
Inspection mirror
Tape curl check
P2
5
J-6252-520-A
Torque screwdriver
Tightening screws of cabinet
P1/P2
(12 kgf
.
cm) (1.2 N
.
m) [JB-5252]
for installing and removing
J-6325-400-A
Torque screwdriver (3 kgf
.
cm)
Tightening screws (for M1.4 and M2 bit)
P1/P2
6
J-6325-110-A
Torque screwdriver bit (for M1.4)
Tightening screws on mech. deck (l = 75 mm)
P1/P2
7
J-6325-380-A
Torque screwdriver bit (for M2)
Tightening screws on drum, capstan,
P1/P2
reel motor and boards (l = 162 mm)
8
J-6322-420-A
Tape guide adjustment driver (45)
Tape path adjustment
P2
9
J-6323-530-A
Stop washer fastening tool
Installation of stop washer
P2
10
J-6323-890-A
Torque cassette (FWD BACK TEN.) [MW-389]
FWD back tension REV back tension measurement
P2
11
J-6324-150-A
Reel table height adjustment tool [MW-415]
Reel height check
P2
12
J-6326-120-A
Hexagon bit (for torque driver)
Tightening screws on mechanical deck for
P2
installing and removing (d = 1.5 mm, l = 85 mm)
13
J-6332-240-A
VISC phase adjusting tool
VISC alignment for PAL system
P2
14
J-6530-380-A
Conversion cable, 6P - 9P
Rewrite internal software
P2
15
J-7032-610-A
Cassette reference plate
Reel height adjustment
P2
16
3-184-527-01
Cleaning cloth (15 cm
x
15 cm)
Cleaning
P1/P2
17
3-649-266-01
Parallel pin (d = 1.6 mm)
Fixing position of cam gear
P2
3-703-358-04
Parallel pin (d = 2.0 mm)
Fixing position of threading gear/drawing arm
P2
when installing
18
7-432-114-11
Screw locking compound (200g)
Inhibits loosening of screws
P2
19
7-651-000-10
Sony grease SGL-601 (50 g)
P2
7-651-000-11
Sony grease SGL-801 (50 g)
P1/P2
7-651-001-59
Grease PG-662 (20 g)
P2
20
7-661-018-18
Diamond oil NT-68 (50 ml)
P2
21
7-700-751-01
Nut driver (s = 4.5 mm)
CTL/AT head height adjustment
P2
22
8-960-075-01
Alignment tape, SR5-1
Video/audio alignment (for 525/60 system)
P2
8-960-075-11
Alignment tape, SR2-1
Servo alignment (for 525/60 system)
P2
8-960-075-51
Alignment tape, SR5-1P
Video/audio alignment (for 625/50 system)
P2
8-960-075-61
Alignment tape, SR2-1P
Servo alignment (for 625/50 system)
P2
23
8-960-096-01
Alignment tape, CR2-1B
Tracking alignment (for analog Betacam, NTSC)
P2
8-960-096-41
Alignment tape, CR5-1B (METAL)
Video alignment (for analog Betacam, NTSC)
P2
8-960-096-51
Alignment tape, CR2-1B PS
Tracking alignment (for analog Betacam, PAL)
P2
8-960-097-44
Alignment tape, CR5-2A (OXIDE)
Betacam video alignment (for analog Betacam, NTSC) P2
8-960-097-45
Alignment tape, CR8-1A (OXIDE)
Betacam audio alignment (for analog Betacam, NTSC) P2
8-960-096-91
Alignment tape, CR5-1B PS (METAL)
Video alignment (for analog Betacam, PAL)
P2
8-960-096-86
Alignment tape, CR8-1B PS (METAL)
Audio alignment (for analog Betacam, PAL)
P2
8-960-098-44
Alignment tape, CR5-2A PS (OXIDE)
Video alignment (for analog Betacam, PAL)
P2
8-960-098-45
Alignment tape, CR8-1A PS (OXIDE)
Audio alignment (for analog Betacam, PAL)
P2
